The STBT bracket system is designed to raise the driver by a additional 60mm compared to the STBI or STBO.

The STBT bracket is needed for regular saloon cars, which require slightly taller brackets in order to sit at the correct position.. They are made from 5mm thick black powder coated aluminium and allow the seat to be tipped, raised and lowered using the various hole and slot combinations. The lower slots in the base of the bracket enable them to fit directly on the Tillett STRO and PTRO seat adjustment runners.

The optional aluminium “Pegged spacer kit” can also be used in these brackets to strengthen the front slots in the event of an accident.

‍

KEY FEATURES

• 60mm taller than the STBI and STBO models.
• Flat floor bracket with 2° angle on sides to match Tillett seats B6S, B6SXL, B6*, B6 XL, B7, B7XL, B8, B9, B10, B10XL, C1 and C1XL car seats (* side mount version only).
• Made from 5mm thick aluminium with textured black powder coated finish.
• The slot and hole options in the brackets allow the seat to be tipped, raised and lowered.
• Lower slot dimension enables them to fit directly on the Tillett STRO and PTRO seat adjustment runners. (Please note we advise against using any seat adjustment runners in a race car, as they are only intended for road use).
• The optional aluminium “Pegged spacer kit” can be used to strengthen the front slots in the event of an accident.
• A pair of STBT weighs 1.5kg.
• Manufactured in the UK.

‍